Barndominium Part 3-Windows

This post first appeared on the Green Building Advisor website.

When I first started planning the water and air control details for the barndominium project, I knew the windows were going to be one of the tougher parts.  Window framing for a typical post and frame building consists of a simple 2x wood frame extending horizontally between two posts, which in the case of this structure are six feet on center, with two vertical boards fastened between the upper and lower horizontal frames.  Once the basic frame is constructed inside the wall cavity, horizontal wall girts are placed over the framing, a kind of window buck, if you will.  My original thought was to have the window buck placed around the window rough opening, flash the buck so I could extend the window flashing back to the Majvest WRB, then add the needed wall girts for fastening the cladding.  In my mind, this wouldn’t be a difficult assembly to build, the framing crew didn’t agree.  They insisted on not changing their usual assembly of having the exterior wall girts installed, then for me to have to figure out how to extend the window flashing to the WRB. Continue reading “Barndominium Part 3-Windows”