Category: Construction Design

Posted on

Construction Design-Flashing Details and the International Flashing Awareness Day 2022

Late summer, 2021, Aron Jones (bigdogconstruction.gm on Instagram) and Gina Hoyt (bigdoglifex3 on Instagram) started the International Flashing Awareness Day to bring awareness to the importance of correct flashing details.  I participated by posting a failed assembly that was lacking correct flashing on my Instagram account.

This year the International Flashing Awareness Day is on Friday, August 26, 2022.  Instead of producing a quick post for Instagram, I decided instead to write a blog covering the subject of flashing in construction.

Continue reading “Construction Design-Flashing Details and the International Flashing Awareness Day 2022”

Posted on

Construction Design-The Anatomy of a Well-Built Wall

I’m a fan of mineral wool insulation, specifically the Rockwool brand.  Over the next few months, I’ll be writing a series of blog posts discussing tips, tricks and the tools used to work with this insulation made from rocks and steel slag a byproduct of the steel industry.  Before we get into those topics, I want to discuss the Rockwool products I use, the building science behind the how these products work in a wall and the characteristics of the insulation, all of which can create a well-built wall assembly.

Continue reading “Construction Design-The Anatomy of a Well-Built Wall”

Posted on

Construction Design-Frost Protected Shallow Foundation (FPSF)

This post first appeared at the Green Building Advisor website.

One of the most popular foundation systems used in my market, and one I’ve been using for more than a decade, is the frost protected shallow foundation.  My very cold climate requires footing depths of five feet.  Digging, constructing and insulating a footing and foundation system that deep is time consuming and expensive.  A shallow foundation system can be a substantial savings for a new build.

Continue reading “Construction Design-Frost Protected Shallow Foundation (FPSF)”

Posted on

Construction Design-Mechanical Room

This post first appeared on the Green Building Advisor website.

I’m one of those nerds that politely tour a new home looking at all the fine trim work and fancy finishes, but secretly can’t wait to get the mechanical room.  (Sometimes I even have to ask to see it.)  If that room is well laid out and neat, I feel I’m in a quality home.  It’s been a few years since I’ve worked full-time as an electrician, but I still remember the frustrations of being on a new build or working in an older home where there just wasn’t enough space in the mechanical room for all the equipment.  The trades working together (more often fighting) for that last piece of wall space to fasten their equipment is something I experienced many times.

Continue reading “Construction Design-Mechanical Room”

Posted on

Construction Design-Chimney Chase

A modern masonry wood-burning fireplace with a factory built metal Class-A chimney system

Many homes that are (or were) heated with wood or fuel oil, or back in the day, coal, have (or had) masonry chimneys to move the exhaust from burning those fuels to the outside.  The chases used to hide these chimney systems are often areas of very high air leakage into and out of a home.  With the advent of modern heating equipment that more efficiently burns natural gas and propane, or a system that doesn’t use any burning fossil fuels inside the home to produce heat, such as electricity, the old masonry chimneys have all but gone by the wayside.  I have been in many homes, including my own, where the use of this type of chimney system has been discontinued.  Mine no longer extends through the roof; it terminates in the attic space.  Others have been completely removed.  Some new homes being built today still have chimney systems, the masonry chimney is rare, most install metal chimneys or use PVC vents. 

Continue reading “Construction Design-Chimney Chase”

Posted on

Construction Design-Service Cavity

This post was first published at www.greenbuildingadvisor.com.

There are many methods used to make a home airtight, it all comes down to one simple rule, continuity.  Continuity is easily attained when there’s nothing that penetrates the air barrier.  No electrical boxes, plumbing drains and vents or ducts that need to extend from inside a building’s envelope to the outside.  Of course, there are times when different things need to extend from inside to outside, like the need for an outside water faucet.  But there are also many occasions when different systems end up outside that don’t need to be outside.  For example, forced air heating and cooling ducts that leave the conditioned space of the home simply because there was no space to keep them hidden inside the home.  Planning a service cavity can help keep most mechanicals inside the building envelope. Continue reading “Construction Design-Service Cavity”

Posted on

Construction Design-Air Sealing Windows

I often hear during energy audits, complaints about windows.  Many homeowners feel the windows are cheaply made and replacement will result in substantial energy savings and an increase in comfort for the home.  Sometimes the windows are a major cause of comfort problems, more often, the window installation is the issue.  This blog post is about three different ways we air seal windows today.

Continue reading “Construction Design-Air Sealing Windows”

Posted on

Construction Design-Performance Metrics

Most new homes built today follow the prescriptive code path for energy efficiency.  Those requirements will depend on the code cycle of your area and your exact climate zone.  The requirement for my area are 3, 3.33, 10, 15, 20, and 49.  These are the code minimum performance numbers for different assemblies in the home.  Let’s discuss each of these numbers, and then I’ll give my opinion as to where I think they should be. I’ll start with the number three and go in the order of the list. Continue reading “Construction Design-Performance Metrics”

Posted on

Construction Design-Insects and Rodents

When I purchased my old home, the 1952 Cape in late 2018, the basement area looked good.  Someone took the time to paint all the concrete walls and floor and cleaned everything up to look nice.  Shortly after we moved in, the cat caught a mouse and then the following summer, the basement became a bug gathering place.  Ants, spiders and other bugs apparently wintered in another area and returned to my house in the spring.

Continue reading “Construction Design-Insects and Rodents”